6mm Surface Mount Microphone for Smart Speakers

Surface Mount Microphone for Smart Speakers 6mm

The ECM-B6027AL42-SMD is a 6 × 2.7 mm omnidirectional SMD microphone capsule for smart speakers. It features a sensitivity of -42dB±2 and a signal-to-noise ratio of 58dB, ensuring reliable performance in compact and space-constrained environments.

🎙️ ECMIC – Microphone Components Manufacturers
For consumer audio & electronics makers
Wholesale & OEM/ODM | 📧 Contact us

🧪 Sample

Standard model free
Shipping cost applies

🧭 Trial Order

From 200 pcs
Test before full order

📦 MOQ

5,000 pcs
Full order minimum

Model: ECM-B6027AL42-SMD
Dimensions: 6 × 2.7 mm
Directivity: Omnidirectional
Sensitivity: -42 dB ± 2
Impedance: 2.2 kΩ
S/N Ratio: 58 dB
Max SPL: 110 dB
Operating Voltage: 2 Vdc
Frequency Response: 50 Hz ~ 16 kHz

Tags: 6mm Electret Equipment Mics

Technical Specifications

Our 6027 SMD surface-mount microphone capsules are specially designed for high-temperature resistance and feature dual capacitors. Manufactured using imported, eco-friendly materials, they ensure reliable performance.

Standard Test Circuit

Test Conditions: Load resistor (RL) = 2.2kΩ, Supply voltage (VS) = 2V, Coupling capacitor (C) = 1μF.

Typical Frequency Response

Frequency response spans 50Hz–16kHz. The curve remains mostly flat, rising from around 4kHz and then gradually declining near 14kHz.

Dimensions (UNIT: mm)

Appearance Dimension

Diameter: 6mm; Height: 2.7mm. Surface-mount electret condenser microphone.

Packaging Overview

Use ESD-safe reel and carrier tape for packing.
Quantity per reel: approx. 1,000 to 5,000 pcs (varies by model).
Each reel is sealed in a moisture-proof, anti-static bag.
Anti-static measures are strictly followed during packaging.
Labeling includes part number, quantity, lot number, and production date.

Reliability Tests

High Temperature Test: Microphone subjected to +85℃ for 200 hours and exposed to room temperature for 3 hours.

Low Temperature Test: Microphone subjected to -40℃ for 200 hours and exposed to room temperature for 3 hours.

Humidity & Heat Test: Microphone subjected to +55℃, 90% RH for 200 hours and exposed to room temperature for 3 hours.

Hi/Low Temperature Shocking Test: Microphone subjected to [+85℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm high amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging.

Storage Temperature Range: -40℃ to +80℃ (humidity less than 90%).

Operating Temperature Range: -40℃ to +80℃ (humidity less than 90%).

ESD Protection: Microphone withstands electrostatic discharge (ESD) up to ±6KV (contact) and ±8KV (air).

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.