14mm Electret Condenser Microphone Element for Clear Conference

1463 Electret Condenser Microphone Element for Clear Conference

The ECM-B1463UL34-683 is a versatile 14 × 6.3 mm unidirectional electret condenser microphone element, specifically engineered for use in conference microphones and speech-driven devices. With a well-balanced sensitivity of -34dB±2 and a signal-to-noise ratio of 75dB, this mic element ensures clear, intelligible voice capture, minimizing background noise for professional-grade audio clarity in meetings and communications.

Model: ECM-B1463UL34-683
Dimensions: 14 × 6.3 mm
Directivity: Unidirectional
Sensitivity: -34dB±2
Impedance: 2.2KΩ
S/N Ratio: 75dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 100Hz~10KHz

Tags: #14mm #Solder Pads #Vocal

Our ECM-B1463UL34-683 unidirectional electret microphone head combines a sensitivity of -34±2dB with a 75dB signal-to-noise ratio, offering reliable performance in voice-centric environments. Known for its effective noise isolation and accurate sound pickup, this microphone head is ideal for achieving sharp and clear audio output in conference systems and communication equipment.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.

Electret Lapel Microphone Capsule 9.7mm

Model: ECM-B9750UL38-714
Dimensions: 9.7 × 5 mm
Sensitivity: -38dB±2

Broadcast Headset Microphone Capsule 6mm

Model: ECM-B6027UL-906
Dimensions: 6 × 2.7 mm
Sensitivity: -35dB±2

Waterproof Lavalier Microphone Capsule 9.7mm

Model: ECM-F9745AL36-IP67
Dimensions: 9.7 × 4.5 mm
Sensitivity: -36dB±2

5.8mm Omnidirectional Electret Microphone Element for Instruments

Model: ECM-B5820AML40-522
Dimensions: 5.8 × 2 mm
Sensitivity: -40dB±2