19mm Boom Dynamic Microphone Capsule

The ECM-DM1912K250 is a rugged 19mm dynamic mic capsule built for high-SPL environments. Its unidirectional pickup and smooth midrange focus deliver clear vocals on stage, in broadcast booths, or for PA systems—without the brittleness of condenser mics.

🚫 Factory direct sales only – no retail.
Minimum order quantities (MOQs) apply.
For intercom & headset makers
📞 Contact us for orders & inquiries.

🧪 Sample

Free (std. models) + shipping

🧭 Trial Order

From 200 pcs (1st order only)

📦 MOQ

3,000 pcs (mixed models allowed)

Model: ECM-DM1912K250
Dimensions: 19.2 × 12 mm
Directivity: Unidirectional
Sensitivity: -59dB±3
Impedance: 250Ω±20%
Frequency Response: 200Hz~7000Hz

Tags: 19mm Dynamic Vocal Mics

Technical Specifications

The 1912 Boom Dynamic Microphone Capsule is designed for exceptional midrange clarity, ensuring precise and present reproduction of vocals and instruments. Its smooth midrange rise enhances detail, while the gentle high-frequency roll-off adds a warm, natural tone, perfect for capturing a full-bodied, authentic sound.

Exploded View & Parts List

Dynamic Part

Frequency Response Curve

Response Curve

Dimensions (UNIT: mm)

Appearance Size

Packaging Overview

Packed in protective foam trays with individual compartments.
Each compartment holds around 4 microphone capsules.
Each capsule is sealed in a protective bag for dust and moisture resistance.
Each box typically contains approximately 2,000 microphone units.

Reliability Tests

High Temperature Test: Microphone subjected to +60℃ ±3℃ for 96 hours with 20-50% humidity, followed by 6 hours of normal temperature lay.

Low Temperature Test: Microphone subjected to -25℃ ±3℃ for 96 hours with 20-50% humidity, followed by 6 hours of normal temperature lay.

Humidity Test: Microphone exposed to 40℃ and 90-95% relative humidity for 96 hours, followed by 6 hours of normal temperature lay.

Temperature Cycle Test: Microphone subjected to rapid temperature changes from normal temperature to +60℃ ±3℃ for 1 hour (normal temperature lay for 3 hours) and then to -25℃ ±3℃ for 1 hour (normal temperature lay for 3 hours).

Sensitivity Stability: Sensitivity remains within ±3dB of the initial sensitivity after each environmental test.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.