4mm Electret Condenser Microphone Element with Leads for Omnidirectional Pickup

4015 Electret Condenser Microphone Element with Leads for Omnidirectional Pickup

High-performance omnidirectional microphone capsule with pre-attached 25mm leads, designed for professional applications requiring reliable, high-quality audio capture. Check our no-lead or 10mm lead versions for alternative options.

Model: ECM-B4015AL38RC-L25
Dimensions: 4 × 1.5 mm
Directivity: Omnidirectional
Sensitivity: -38dB±2
Impedance: 2.2KΩ
S/N Ratio: 65dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 50Hz~16KHz

Tags: #4mm #Equipment #Wire Leads

The ECM-B4015AL38RC-L25 is a 4mm omnidirectional microphone capsule that comes with 25mm pre-attached leads, offering added flexibility and convenience for integration into a wide range of professional audio devices. Featuring a custom-built high-quality mic core with dual-capacitor technology, it provides superior interference resistance, ensuring clear, reliable sound in noisy environments.

With a frequency range of 50Hz to 16KHz, the capsule captures audio with exceptional clarity. Its -38dB sensitivity and 65dB signal-to-noise ratio make it an excellent choice for audio applications that demand precision, such as broadcast equipment, speech recognition, and high-quality recording devices. The extended 25mm leads are designed for devices where additional wiring length is required, providing greater flexibility for different setups.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.

6mm Electret Instrument Microphone Capsule with Pins

Model: ECM-B6027UP-47
Dimensions: 6 × 2.7 mm
Sensitivity: -47dB±2

Security Camera Microphone Capsule 6mm

Model: ECM-B6027AL30RC
Dimensions: 6 × 2.7 mm
Sensitivity: -30dB±2

6mm Dual Directional Electret Microphone Element

Model: ECM-B6026NL52-454
Dimensions: 6 × 2.6 mm
Sensitivity: -52dB±3

6mm Omnidirectional Electret Microphone Insert for Wireless Lavalier

Model: ECM-B6027AL30-715
Dimensions: 6 × 2.7 mm
Sensitivity: -30dB±2