9.7mm Voice Recognition Electret Microphone Insert with Leads

Voice Recognition Electret Microphone Insert with Leads 9.7mm

9.7mm omnidirectional microphone capsule with pre-attached 100mm twisted leads and terminals for secure connections. For shorter leads, see 15mm lead version. For waterproof or standard versions, check IP67-rated model or no-lead model.

🚫 Factory direct sales only – no retail.
Minimum order quantities (MOQs) apply.
For audio brands & OEMs
📞 Contact us for orders & inquiries.

🧪 Sample

Free (std. models) + shipping

🧭 Trial Order

From 200 pcs (1st order only)

📦 MOQ

5,000 pcs (mixed models allowed)

Model: ECM-B9745AL30RC-L100
Dimensions: 9.7 × 4.5 mm
Directivity: Omnidirectional
Sensitivity: -30dB±2
Impedance: 2.2KΩ
S/N Ratio: 74dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 20Hz~20KHz

Tags: 9.7mm Electret Equipment Mics Wire Connector Electret

Technical Specifications

The ECM-B9745AL30RC-L100 is a 9.7 × 4.5 mm omnidirectional microphone capsule featuring pre-attached 100mm twisted leads and terminals for enhanced interference resistance and simplified assembly.

With a -30dB sensitivity and a wide frequency range of 20Hz to 16KHz, this capsule offers reliable long-distance sound capture. The Korean RF mic core ensures consistent performance, making it ideal for remote pickup systems and condenser microphones requiring stable wiring configurations.

Standard Test Circuit

Test conditions: RL = 2.2KΩ, Vs = 2V, C = 1μF.

Typical Frequency Response

Frequency response range: 50Hz–10kHz. The curve stays relatively flat up to around 3kHz, then gradually decreases, offering stable low- and mid-frequency performance while attenuating higher frequencies.

Dimensions (UNIT: mm)

Appearance Dimension

The capsule measures 9.7mm in diameter and 4.5mm in height. The front is fitted with a dustproof mesh, while the rear is sealed with no acoustic port. A 100mm twisted terminal wire is pre-attached for convenient integration.

Packaging Overview

Standard packaging: 100 pcs per small box.
10 small boxes (1,000 pcs) are combined into one medium carton.
Several medium cartons are further packed into a large outer carton.
Pin-type microphones are protected with foam inside the small box.
Other types are packed directly or sealed in anti-static bags.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.