9.7mm Unidirectional Electret Condenser Microphone Element for Wireless Conference

The ECM-770 is a 9.7 × 5 mm unidirectional microphone capsule designed for applications such as conference microphones and lapel mics. With a sensitivity of -38dB±2 and a signal-to-noise ratio of 60dB, it ensures clear sound capture for high-quality audio performance.

Model: ECM-770
Dimensions: 9.7 × 5 mm
Directivity: Unidirectional
Sensitivity: -38 dB ± 2
Impedance: 680 Ω
S/N Ratio: 60 dB
Max SPL: 110 dB
Operating Voltage: 1.5 Vdc
Frequency Response: 100 Hz ~ 12 kHz
Current Consumption: 500 μA

Request Information / Sample

Tell us your project stage. Our engineering team will respond accordingly.

Lead Time

Samples: 1–3 weeks
Mass production: 2–4 weeks

Customization

Application-based engineering support
Structure / sensitivity / acoustic tuning

MOQ

3,000 pcs
Per model / per production batch

Certification

RoHS & UL compliant
Industrial reliability assured

Technical Specifications

Our single-directional 9750 microphone head features dual capacitors and anti-interference magnetic beads to effectively shield against RF interference. It utilizes high-quality Korean RF JFET, ensuring stable and reliable performance.

Standard Test Circuit

ECM-770 Standard Test Circuit: 680Ω load, 1.5V supply, 1μF output

Tested with a 680Ω load resistor, 1.5V DC supply, and 1μF coupling capacitor.

Typical Frequency Response

ECM-770 Frequency Response Curve

Frequency response rises from 100Hz to 500Hz, then remains relatively flat until about 8kHz, where it begins to decline.

Dimensions (UNIT: mm)

Dimensions of ECM-770: Φ9.7×5mm

Compact capsule measuring Φ9.7 × 5mm, featuring a front dustproof mesh and a rear acoustic inlet.

Packaging Overview

Standard packaging: 100 pcs per small box.
10 small boxes (1,000 pcs) are combined into one medium carton.
Several medium cartons are further packed into a large outer carton.
Pin-type microphones are protected with foam inside the small box.
Other types are packed directly or sealed in anti-static bags.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.