6mm Surface Mount Electret Microphone

The ECM-B6027AL-SMD-40 is a 6 × 2.7 mm SMD microphone tailored for smart speakers. With omnidirectional directivity and a sensitivity of -40dB±3, it provides reliable and clear sound capture.

Model: ECM-B6027AL-SMD-40
Dimensions: 6 × 2.7 mm
Directivity: Omnidirectional
Sensitivity: -40 dB ± 3
Impedance: 2.2 kΩ
S/N Ratio: 58 dB
Max SPL: 110 dB
Operating Voltage: 2.2 Vdc
Frequency Response: 50 Hz ~ 16 kHz
Current Consumption: 450 μA

Request Information / Sample

Tell us your project stage. Our engineering team will respond accordingly.

Lead Time

Samples: 1–3 weeks
Mass production: 2–4 weeks

Customization

Application-based engineering support
Structure / sensitivity / acoustic tuning

MOQ

5,000 pcs
Per model / per production batch

Certification

RoHS & UL compliant
Industrial reliability assured

Technical Specifications

Featuring an SMD high-temperature resistant core and dual capacitors made from imported eco-friendly materials, our 6027 surface-mount microphone head delivers superior performance.

Standard Test Circuit

Test Conditions: Load resistor (RL) = 2.2kΩ, Supply voltage (VS) = 2V, Coupling capacitor (C) = 1μF.

Typical Frequency Response

Frequency response covers 50Hz–16kHz, with a flat response that rises near 4kHz and tapers off around 14kHz. Similar curve profile as ECM-B6027AL42, with slight sensitivity variation.

Dimensions (UNIT: mm)

Appearance Dimension

Diameter: 6mm; Height: 2.7mm. Surface-mount electret condenser microphone.

Packaging Overview

Use ESD-safe reel and carrier tape for packing.
Quantity per reel: approx. 1,000 to 5,000 pcs (varies by model).
Each reel is sealed in a moisture-proof, anti-static bag.
Anti-static measures are strictly followed during packaging.
Labeling includes part number, quantity, lot number, and production date.

Reliability Tests

High Temperature Test: Microphone subjected to +85℃ for 200 hours and exposed to room temperature for 3 hours.

Low Temperature Test: Microphone subjected to -40℃ for 200 hours and exposed to room temperature for 3 hours.

Humidity & Heat Test: Microphone subjected to +55℃, 90% RH for 200 hours and exposed to room temperature for 3 hours.

Hi/Low Temperature Shocking Test: Microphone subjected to [+85℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm high amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging.

Storage Temperature Range: -40℃ to +80℃ (humidity less than 90%).

Operating Temperature Range: -40℃ to +80℃ (humidity less than 90%).

ESD Protection: Microphone withstands electrostatic discharge (ESD) up to ±6KV (contact) and ±8KV (air).

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.