4mm Cardioid Microphone for Headsets with Pin

4015 Cardioid Microphone for Headsets with Pin

Compact 4mm cardioid microphone capsule for headsets, designed with an enhanced high-frequency response to improve clarity for applications requiring crisp, clear voice reproduction. Ideal for gaming headsets, VR headsets, and professional communication systems.

Model: ECM-B4015UP40-474
Dimensions: 4 × 1.5 mm
Directivity: Unidirectional
Sensitivity: -40dB±2
Impedance: 2.2KΩ
S/N Ratio: 52dB
Max SPL: 105dB
Operating Voltage: 2Vdc
Frequency Response: 100Hz~16KHz

Tags: #4mm #Conference #Pin Type

The ECM-B4015UP40-474 is a 4mm cardioid microphone capsule optimized for headsets, offering clear and intelligible voice capture. Its enhanced high-frequency response provides a natural emphasis on higher frequencies, improving speech clarity for applications where crisp, bright sound reproduction is critical.

This microphone capsule features a moderate sensitivity of -40dB and a signal-to-noise ratio of 52dB, ensuring clear audio without distortion. The capsule’s frequency range of 100Hz-16kHz delivers consistent, bright sound reproduction for precise voice capture in dynamic environments.

Designed with a pin connector (2.8mm length) and compact dimensions (4mm x 1.5mm), this microphone capsule is built with Cu-plated pins and an Al & Mg alloy casing, ensuring long-term durability and reliability. It’s perfect for use in gaming headsets, VR headsets, professional communication systems, and more.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.

4mm Cardioid Microphone for Headsets with Pin

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Reviews

Packaging Overview

Reliability Tests

Sampling Process

Our Certificates

Quality Assurance

Acoustic Laboratory

Automatic Workshop

Related Products

9.7mm Unidirectional Electret Microphone Element for Gooseneck

9.7mm Omnidirectional Electret Microphone Cartridge for Parabolic Microphone

Vocal Recording Microphone Capsule 14mm

9.7mm Electret Microphone Capsule with Pins for Doorbell