6mm Back Electret Condenser Microphone Capsule

Back Electret Condenser Microphone Capsule 6mm

ECM-B6027AL26-941 microphone circuit diagram and dimensions, showing key components and size

ECM-B6027AL26-941 microphone frequency response chart, showing sensitivity and performance across the frequency range

ECMIC microphones 12,000 m² factory with 6M+ units monthly output and ISO/CE certifications

ECMIC microphones automated production line overview, showing assembly and quality control process

The ECM-B6027AL26-941 is a 6 × 2.7 mm omnidirectional microphone capsule designed for long-distance pickup devices. With a sensitivity of -26dB±2 and a signal-to-noise ratio of 56dB, it ensures effective sound capture in various applications requiring distant audio pickup.

🎙️ ECMIC – Microphone Components Manufacturers
For audio equipment manufacturers & brands
Wholesale & OEM/ODM | 📧 Contact us

🧪 Sample

Standard model free
Shipping cost applies

🧭 Trial Order

From 200 pcs
Test before full order

📦 MOQ

5,000 pcs
Full order minimum

Model: ECM-B6027AL26-941
Dimensions: 6 × 2.7 mm
Directivity: Omnidirectional
Sensitivity: -26 dB ± 2
Impedance: 2.2 kΩ
S/N Ratio: 56 dB
Max SPL: 110 dB
Operating Voltage: 2 Vdc
Frequency Response: 50 Hz ~ 16 kHz
Current Consumption: 270 μA

Tags: 6mm Electret Equipment Mics Solder Pads Electret

Performance Overview

Our omnidirectional 6027 microphone head offers high sensitivity and interference resistance, custom-produced with high-quality JFET technology.

Technical Specifications

Standard Test Circuit

Test conditions: RL = 2.2kΩ, Vs = 2V, C = 1μF.

Typical Frequency Response

Relatively flat from 50Hz to 2kHz with minor fluctuations, followed by a noticeable rise between 2kHz and 8kHz, then a gradual decline toward 20kHz — suitable for capturing voice and ambient sounds with extended high-frequency sensitivity, ideal for compact devices requiring reliable vocal pickup.

Dimensions (UNIT: mm)

Appearance Dimension

Compact 6.0 × 2.7mm capsule with front dust mesh and a sealed back—designed for space-limited devices requiring consistent audio quality.

Packaging Overview

Standard packaging: 100 pcs per small box.
10 small boxes (1,000 pcs) are combined into one medium carton.
Several medium cartons are further packed into a large outer carton.
Pin-type microphones are protected with foam inside the small box.
Other types are packed directly or sealed in anti-static bags.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.