9.7mm Omnidirectional Electret Microphone Capsule for Outdoor Camera

9745 Omnidirectional Electret Microphone Capsule for Outdoor Camera

The ECM-B9745AL30RC-IP67 is a 9.7 × 4.5 mm omnidirectional microphone capsule designed for long-distance pickup devices and condenser microphones. With a sensitivity of -30dB±2 and a signal-to-noise ratio of 74dB, it provides clear audio capture, making it ideal for various high-performance applications.

Model: ECM-B9745AL30RC-IP67
Dimensions: 9.7 × 4.5 mm
Directivity: Omnidirectional
Sensitivity: -30dB±2
Impedance: 2.2KΩ
S/N Ratio: 74dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 20Hz~5000Hz

Tags: #9.7mm #Security #Solder Pads

Our 9745 microphone core is IP67-rated for waterproofing and features a Korean JFET for stability and reliability. This omnidirectional waterproof transducer, with -30dB sensitivity, ensures effective long-distance audio capture.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.

10mm Omnidirectional Electret Condenser Microphone Capsule for Vocal Recording

Model: ECM-B1045AML36-061
Dimensions: 10 × 4.5 mm
Sensitivity: -36dB±2

6mm Dual Directional Electret Microphone Element

Model: ECM-B6026NL52-454
Dimensions: 6 × 2.6 mm
Sensitivity: -52dB±3

6mm Robot Electret Microphone Capsule with Pins

Model: ECM-B6027AP2.8-30RC
Dimensions: 6 × 2.7 mm
Sensitivity: -30dB±2

6mm Electret Instrument Microphone Capsule with Pins

Model: ECM-B6027UP-47
Dimensions: 6 × 2.7 mm
Sensitivity: -47dB±2