9.7mm Electret Microphone Capsule with Pins for Doorbell

9767 Electret Microphone Capsule with Pins for Doorbell

Rated 5.00 out of 5

The ECM-F9767AP-30 is a 9.7 × 6.7 mm omnidirectional microphone capsule suitable for applications such as building intercom systems and walkie-talkie devices. With a sensitivity of -30dB±2 and a signal-to-noise ratio of 68dB, it ensures clear and reliable audio transmission.

Model: ECM-F9767AP-30
Dimensions: 9.7 × 6.7 mm
Directivity: Omnidirectional
Sensitivity: -30dB±2
Impedance: 2.2KΩ
S/N Ratio: 68dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 100Hz~10KHz

Tags: #9.7mm #Intercom #Pin Type

Our 9767 omnidirectional microphone head features a high-sensitivity electret transducer core and plug-in design, ensuring optimal performance and versatility.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

1 review for 9.7mm Electret Microphone Capsule with Pins for Doorbell

5.0 Rating

1-1 of 1 review

Pierre SANGOUARD

Reviewer

March 9, 2024

Rated 5 out of 5

I received the sample. It looks good, working fine. Matching with our need.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.

6mm Omnidirectional Electret Microphone Capsule with Pins

Model: ECM-B6050AP40-069
Dimensions: 6 × 5 mm
Sensitivity: -40dB±2

Live Recording Microphone Capsule 5.8mm

Model: ECM-B5820AL36-522
Dimensions: 5.8 × 2 mm
Sensitivity: -36dB±2

Security Camera Microphone Capsule 6mm

Model: ECM-B6027AL30RC
Dimensions: 6 × 2.7 mm
Sensitivity: -30dB±2

6mm Electret Instrument Microphone Capsule with Pins

Model: ECM-B6027UP-47
Dimensions: 6 × 2.7 mm
Sensitivity: -47dB±2