High-Performance Uni Electret Mic Capsule for Hi-Fi Audio Systems

Uni Electret Mic Capsule for Hi-Fi Audio Systems High-Performance

High-performance 10 × 4.5 mm unidirectional electret microphone capsule with a 125dB max SPL, ideal for high-volume applications like headsets and audio equipment.

📦 MOQ

5,000 pcs

🧪 Sample Order

1 pcs

🧭 Trial Order

from 500 pcs

Model: ECM-B1045UML50-25082
Dimensions: 10 × 10 × 4.5 mm
Directivity: Unidirectional
Sensitivity: -50dB±2
Impedance: 2KΩ
S/N Ratio: 65dB
Max SPL: 125dB
Operating Voltage: 2Vdc
Frequency Response: 100Hz~10KHz

Tags: 10mm Electret Conference Mics Solder Pads Electret

Performance Overview

The ECM-B1045UML50-25082 is a high-fidelity unidirectional electret microphone capsule, featuring a 10 × 4.5 mm design tailored for clear sound capture in headsets and other audio devices. With a -50dB sensitivity and a wide frequency response range of 100Hz to 10KHz, it delivers excellent audio quality for applications demanding precise sound reproduction.

The microphone’s low impedance (2KΩ) and solid 65dB signal-to-noise ratio ensure clear, consistent audio performance even in noisy environments. The high maximum SPL of 125dB makes it suitable for high-volume applications, while its operating voltage of 2Vdc ensures compatibility with a variety of audio equipment.

This microphone capsule is perfect for Hi-Fi audio systems, professional headsets, and any application where high-quality, detailed sound reproduction is crucial.

Standard Test Circuit

Typical Frequency Response

Appearance Dimension

Packaging Overview

Standard packaging: 100 pcs per small box.
10 small boxes (1,000 pcs) are combined into one medium carton.
Several medium cartons are further packed into a large outer carton.
Pin-type microphones are protected with foam inside the small box.
Other types are packed directly or sealed in anti-static bags.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.