6mm Omnidirectional Electret Microphone Capsule with Pins

Omnidirectional Electret Microphone Capsule with Pins 6mm

The ECM-B6050AP40-069 is a 6 x 5 mm omnidirectional electret mic capsule with 2 pins, -40dB±2 sensitivity, and 60dB SNR. Ideal for instrument pickups, noise meters, walkie-talkies, and lapel mic recordings.

🚫 Factory direct sales only – no retail.
Minimum order quantities (MOQs) apply.
For audio brands & OEMs
📞 Contact us for orders & inquiries.

🧪 Sample

Free (std. models) + shipping

🧭 Trial Order

From 200 pcs (1st order only)

📦 MOQ

5,000 pcs (mixed models allowed)

Model: ECM-B6050AP40-069
Dimensions: 6 × 5 mm
Directivity: Omnidirectional
Sensitivity: -40dB±2
Impedance: 2.2KΩ
S/N Ratio: 60dB
Max SPL: 110dB
Operating Voltage: 2Vdc
Frequency Response: 50Hz~20KHz

Tags: 6mm Electret Equipment Mics Pin-type Electret

Technical Specifications

Our 6050 plug-in microphone head is an omnidirectional electret transducer featuring built-in dual capacitors for effective RF interference shielding. It is produced using imported JFET and eco-friendly materials, ensuring high performance and sustainability.

Standard Test Circuit

Test conditions: RL = 2.2kΩ, Vs = 2V, C = 1μF

Typical Frequency Response

The frequency response spans 50Hz to 20kHz. It remains flat from 50Hz to 3kHz, then rises between 3kHz and 6kHz to improve vocal presence. After 6kHz, the response begins to roll off steadily toward higher frequencies.

Dimensions (UNIT: mm)

Appearance Dimension

Capsule dimensions: 6.0mm diameter × 5.0mm height. The front face features a dustproof mesh, while the back is sealed with no acoustic port.

Packaging Overview

Standard packaging: 100 pcs per small box.
10 small boxes (1,000 pcs) are combined into one medium carton.
Several medium cartons are further packed into a large outer carton.
Pin-type microphones are protected with foam inside the small box.
Other types are packed directly or sealed in anti-static bags.

Reliability Tests

High Temperature Test: Microphone subjected to +80℃ for 100 hours, followed by 3 hours at room temperature.

Low Temperature Test: Microphone subjected to -40℃ for 100 hours, followed by 3 hours at room temperature.

Humidity & Heat Test: Microphone exposed to +55℃ and 85% relative humidity for 100 hours, followed by 3 hours at room temperature.

Thermal Shocking Test: Microphone subjected to [+80℃ 0.5H → room temp 1H → -40℃ 0.5H → room temp 1H] for 10 cycles, then exposed to room temperature for 3 hours.

Vibration Test: Microphone subjected to two hours of vibration in x, y, and z directions with frequencies of 10-55Hz and a 1.52mm amplitude.

Drop Test: Microphone dropped 5 times from a height of 1.0 meter onto a slippery marble floor, without packaging, and still performs normally.

Storage and Operating Temperature Range: Suitable for environments ranging from -35℃ to +60℃.

Sampling Process

Confirm customer requirements:

Review product application, microphone capsule specifications, usage scenarios, and sound quality needs.

Recommend and specify:

Provide recommended microphone capsule models and detailed specifications for customer evaluation.

Sample provision and testing:

Deliver microphone samples for customer testing and feedback purposes.

Optimize and finalize:

Refine microphone design based on feedback, finalize samples, and proceed to mass production upon quality approval.

Quality Assurance

Conducting sampling inspections of incoming materials to ensure compliance with standard requirements.

Performing inspection audits to ensure the stability and control of the entire manufacturing process.

Conducting pre-shipment inspections to ensure that products meet established quality standards.

Acoustic Laboratory

Testing of background noise, sensitivity, frequency response curve, and directionality indicators.

Verification of the impact of different circuits, structural dimensions, materials, and processes on indicators.

Reliability testing at both the new product design stage and the mass production regular stage.

Automatic Workshop

Utilizing fully automated production lines to ensure high efficiency and consistency.

Equipped with state-of-the-art facilities, including a 10,000-level dust-free workshop.

Employing a rigorous 21-step process to guarantee product stability.